Turn Autolaunch Off/On - Visioneer Strobe 500 User Manual

3. Place an item face up, on the front feed tray, aligned to the registration marks on the tray and insert it into
the front of the scanner.
4. For one-sided scanning press the Simplex button.
For two-sided scanning press the Duplex button.
T A L O
URN UTO AUNCH FF
AutoLaunch™ is the scanner's ability to automatically start scanning when it detects a page has been inserted into
the front of the scanner. You can turn this feature on from the Application settings tab in the hardware properties
for your scanner. If you want to scan from the OneTouch button panel on screen, or to be able to place a page in
the scanner and wait until you are ready to initiate the scan, you can turn the AutoLaunch feature off.
To turn AutoLaunch off or on:
1. Click on the OneTouch icon in the Windows notification area on the right side of the screen.
/O
N
OneTouch Icon
L D S
OADING OCUMENTS TO CAN
35