Disabled Options In This Section - Visioneer Strobe 500 User Manual

D O
ISABLED PTIONS IN THIS
Some options in the interface may be grayed out and cannot be selected. Grayed out options are either not
appropriate for the current scanner, the software needed to enable the feature is not installed,
dependent on another setting in the scanner's interface. Hover the mouse cursor over a grayed out feature to see
information about why the feature is unavailable.
When you are using a scanner that has multiple sources, such as an ADF with Flatbed combination scanner, some
options may be disabled based on the current source displayed in the source list. For example when the flatbed
source is selected, the manual feed option will be disabled.
If an option is unavailable, check to see which source is displayed at the top of the source list when in the
Advanced interface view.
When Flatbed is displayed here, only the
options that can be used for the flatbed will be
available in the scanner interface.
Note that even when Sources identical is selected, any options that are only available for a specific source will be
discarded if the scanner scans from the source that does not have those options.
S
ECTION
Click on one of the color modes under the
source you want to configure. That source will
now be displayed at the top of the list, and the
options for that source will be available in the
scanner interface.
S TWAIN
CANNING FROM AND
WIA 161
the feature is