Scan From The Onetouch Button Panel - Visioneer PATRIOT 780 SCANNER User Manual

30 V P
ISIONEER ATRIOT
780 S U ' G
CANNER SER S UIDE
S
CAN FROM THE
When you click on a button in the OneTouch button panel, the scanner scans
the item, then sends the image to the destination indicated by the button's
icon.
The OneTouch Button Panel is your on-screen set of controls for the scanner.
From the panel you can scan, access the hardware settings for your scanner, and
configure the OneTouch buttons.
1. Load a stack of documents face up in the ADF, with the tops pointing into
the scanner, or place a single page face down on the flatbed glass.
2. Click on the OneTouch icon in the Windows Notification Area (at the
bottom right corner of the screen).
Click on the
OneTouch icon.
3. After the OneTouch Button Panel opens, click a button on the panel to
start scanning.
Click the button you
want to use to scan.
4. A scan progress window opens and the image is sent to the selected
destination for that OneTouch button.
O T B
NE OUCH UTTON
P
ANEL
Click these arrows
to navigate through
the 9 functions.