Turn Autolaunch Off/On - Visioneer ROAD WARRIOR User Manual

44 V S
ISIONEER TROBE
XP S U ' G
CANNER SER S UIDE
T A L
URN UTO AUNCH
In some instances, you may not want to use the scanner's AutoLaunch
technology. In that case, you can turn it off so the scanner will not
automatically scan when you insert a document. Then, you can use the
TWAIN interface, or some other application's interface for scanning.
You can turn the AutoLaunch technology off and on from either the
OneTouch icon, or from the Windows Control Panel.
To turn the AutoLaunch Off/On from the OneTouch icon:
1. Right-click on the OneTouch icon in the Windows Notification
Area (at the bottom right corner of the screen).
The OneTouch Icon
2. Choose Show Hardware from the pop-up menu.
Note: If you're working with the TWAIN interface, you can also click
the small Strobe XP icon in the upper right corner of the window to
open the Visioneer Strobe XP Properties window. See the example on
page 142.
O /O
FF N