Basic Controls - Panasonic TH-42BT300W Operating Instructions Manual

Basic Controls

Main Unit
Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will
still consume some power as long as
the power cord is still inserted into the
wall outlet.)
• Standby ........ Red
Orange (When "Slot power" is set to
"On". See page 60)
Orange (Depending on the type of
the function board installed, when the
power is supplied to the slot)
Orange (When "Control I/F Select" is
set to "LAN". See page 58)
• Power-ON ...... Green
• PC Power management (DPMS)
.......................Orange (With PC input signal.
See page 42)
• DVI-D Power management
.......................Orange (With DVI input signal.
See page 42)
+
INPUT MENU -/ VOL
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu
screen will switch. (see page 25)
INPUT button
(INPUT signal selection)
(see page 18)
Volume Adjustment
Volume Up "+" Down "–"
When the menu screen is
displayed:
"+" : press to move the cursor up
"–" : press to move the cursor down
(see page 25)
Enter / Aspect button
(see page 21, 25)
/ ENTER/
Normal Viewing
Sound Pos./Size
Picture
Setup
19