Basic Controls - Panasonic TH-37PWD4RZ Operating Instructions Manual

Basic Controls

Main Power On/Off Switch
The Power Indicator will light.
•
Power-OFF ..... Indicator not illuminated (The
unit will still consume some power as long as
the power cord is still inserted into the wall
outlet.)
•
Stand-by .... Red
•
Power-ON ...... Green
Stand-by (ON/OFF) button
The Plasma Display must first be plugged into the wall
outlet and turnded on at the power switch (see page 16).
Push this button to turn the Plasma Display On, from
Stanby mode. Push it again to turn the Plasma Display
Off to Stanby mode.
Status button
Push the "Status" button to display
the current system status.
AV
4 : 3
Off timer 90
1 AV(S Video)/Component, RGB/
PC mode
2 Aspect mode (see page 20)
3 Off timer
The off timer indicator is displayed
only when the off timer has been set.
N button
(see page 23, 24, 26, 27)
PICTURE button
(see page 26)
PICTURE POS./SIZE button
(see page 22)
PC button
Push the "PC" mode selection
button to select the PC mode.
This button is used to switch
directly to PC mode.
R - STANDBY
G POWER ON
TH-42PWD4
Power Indicator
(AV (S Video)/Component, RGB/PC
Mode Selection)
Push the "INPUT" button to select AV(S
Video)/Component or RGB/PC input
signal modes sequentially.
(see page 17)
1
2
3
N
PICTURE
PICTURE
POS. /SIZE
PC
The Plasma Display may be preset to switch to stand-by after a fixed period. The
setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer
cancelled) each time the button is pressed.
When three minutes remain, "Off timer 3" will flash.
The off timer is cancelled if a power interruption occurs.
–
INPUT
INPUT button
SURROUND button
(see page 25)
INPUT
SURROUND
VOL
R
SOUND SET UP
ASPECT
OFF TIMER
OFF TIMER button
+
VOL
Volume Adjustment
Push the Volume Up "+"
or Down "–" button to
increase or decrease the
sound volume level.
INPUT button
(AV(S Video)/Component, RGB/
PC Mode Selection)
Press to select AV(S Video)/
Component or RGB/PC input signal
modes sequentially. (see page 17)
Sound mute On/Off (see page 24)
Volume Adjustment
Press the Volume Up "+" or Down
"–" button to increase or decrease
the sound volume level.
R button
ACTION button
Press to make selections
POSITION buttons
SET UP button (see page 18)
SOUND button (see page 24)
ASPECT button
Press to adjust the aspect.
(see page 20)
30 60
0
90
15