Connections; Speaker Connection; Ac Cord Connection And Fi Xing, Cable Fi Xing - Panasonic TH-42BT300W Operating Instructions Manual

Connections

Speaker connection

When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker's Installation Manual for details on speaker installation.
Speakers (Optional accessories)
Speaker terminal (R)
AC cord connection and fi xing, cable fi xing
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.
Attach the clamper
1
Insert the clamper
in a hole.
10
AC cord connection (see page 15)
AC cord fi xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
When using the Wall-hanging bracket (vertical)
Note:
When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes
and to secure the cables. If the clamper is used on the hole
be caught by the wall-hanging bracket.
To remove from the unit:
hole
Keep pushing
both side
snaps
Speaker
terminal (L)
Bundle the cables
2
snaps
hooks
1
Black
While pressing the lever,
insert the core wire.
2
Black
Return the lever.
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
, the cables may
To loosen:
Set the
knob
tip in the
hooks
Red
Red
Keep
pushing
the knob