Irq/Event Acitvity Detect; 3-8-1.1 Irqs Activity Monitoring - JETWAY PT88BSPRO User Manual

3-8-1 IRQ/Event Activity Detect
VGA
LPT & COM
HDD & FDD
PCI Master
PS2KB Wakeup Select
PS2KB Wakeup from S3/S4/S5
Wake-Up on GPI
Wake-Up on PCI Card
Modem Ring Resume
RTC Alarm Resume
x Date of Month Alarm
x Time (hh:mm:ss)
> IRQs Activity Monitoring
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Modem Ring Resume
During Disabled, the system will ignore any incoming call from the modem. During Enabled, the
system will boot up if there's an incoming call from the modem.
RTC Alarm Resume
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
IRQs Activity Monitoring
Please refer to section 3-8-1.1
3-8-1.1 IRQs Activity Monitoring
Primary INTR
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
IRQ/Event Activity Detect
OFF
LPT/COM
ON
OFF
Hot key
Disabled
Disabled
Disabled
Disabled
Disabled
0
0 : 0 : 0
Press Enter
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
IRQs Activity Monitoring
ON
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
F6:Optimized Defaults
42
Item Help
Menu Level >>
F7:Standard Defaults
Item Help
Menu Level >>>
F7:Standard Defaults