Table of Contents
Advertisement
Maintenance Instructions.
NOTE: This manual is a general manual. Information in this manual may or
may not pertain to your model. Please read carefully.
NOTE: Left and right describes the location of a part with the operator
facing the outlet panel.
REMOVE GENERATOR FROM CARTON
•
Open carton from top.
•
Cut carton along dotted lines.
•
Remove all carton inserts.
•
Remove generator through opening in
carton.
•
Remove shipping block(s) from under the
gen head. Unscrew bolt(s) and remove the
shipping block(s). It is very important that
this is removed before starting your
generator.
•
(If equipped) See portability Kit instructions to assemble the portability kit.
OTHER LOOSE PARTS
1.
Oil is supplied, see engine operators manual for correct procedure to add oil
and fuel to engine.
2.
The locking plugs maybe used when needed or required.
regulations. Refer to instructions enclosed with each plug for proper
installation.
3.
12V DC cables to be used with the 12V DC outlets. See Operation section.
IMPORTANT: Before any attempt to start your generator be sure to check engine
oil (See Engine Operator's manual)
GROUNDING THE GENERATOR
A grounding lug is supplied with the generator for
use when required by local electrical ordinances.
Refer to article 250 of the National Electrical Code
to clarify any needed grounding information. Your
local electric company or a certified electrician
should be able to help you with this information.
ASSEMBLY
Read this manual. Do not attempt to operate equipment
until you have read this Manual for Safety, Operation, and
The locking plugs are to be installed and/or used in
accordance with appropriate local electrical code
9- ENG
Grounding Lug
Hide quick links:
Advertisement
Table of Contents
