Summary of Contents for Küppersbusch Glass ceramic induction
Page 1
Gebrauchs- und Montageanweisung Induktions-Glaskeramik-Kochfeld Instructions for fitting and use Glass ceramic induction hob Instructions de montage et d’utilisation Table de cuisson vitrocéramique à induction Gebruiks- en montage-instructies Keramische inductiekookplaat Istruzioni per uso e montaggio Piano di cottura ad induzione in vetroceramica Instrucciones para el uso y montaje Encimera vitrocerámica per inducción...
Disposing of the packaging For your information... Please ensure the environmentally-friendly disposal of the pack- Please read this manual carefully before using your appliance. It aging that came with your appliance. Recycling the packaging contains important safety advice; it explains how to use and look material saves on resources and cuts down on waste.
Safety instructions Safety instructions Connection and operation • Do not put aluminium foil or plastic onto the cooking zones. Keep everything which could melt, such as plastics, foil and in • The appliances are constructed in accordance with the rele- particular sugar and sugary foods away from hot cooking vant safety regulations.
Appliance description p li The decorative design may deviate from the illustrations. 8. ON/OFF key 9. Minus key (lower) / Plus key (raise) 1. Induction cooking zone front left 10. Power setting pre-select keys 2. Induction cooking zone back left 11.
Appliance description Operating the hob with the sensor keys Power setting display (12) The power setting display shows the power setting which has The ceramic glass hob is operated with touch control sensor been selected, or: keys. The sensor keys are operated as follows: lightly touch a ....
Operation Operation The hob Operation time limit The hob is equipped with an induction cooking mode. An induc- The induction hob has an automatic time limit function. tion coil underneath the glass ceramic hob generates an electro- The duration of continuous use of each cooking zone depends on magnetic alternating field which penetrates the glass ceramic the cooking level selected (see chart), and induces the heat-generating current in the pot base.
Operation Cookware for induction hobs How to cut power consumption Cookware for induction cooking zones must be made of metal The following are a few useful hints to help you cut your con- and have magnetic properties. The base must be sufficiently sumption of energy and use your new induction hob and the large.
Operation Switch on the cooking zone 1. Press the ON/OFF key until 0 blinks in the power setting display. A short signal will sound. 2. Then immediately press the Plus key to select the power setting (1...12). The Minus key can be used to reduce the setting.
Operation Automatic on/off function of the 21-cm cooking zone (start control) This automatic function can be used to switched on the 21-cm cooking zone at a specified time. After the programmed cooking time has expired the cook- ing zone will be switched off. 1.
Operation Locking The lock can be used to lock key operation and cooking level settings. Only the ON/OFF key can be used to switch the hob off. Activating the lock 1. Press the lock key for some time (approx. 3 sec.) in order to acti- vate the function.
Operation Automatic boost function Parboiling takes place at power level 12 with the automatic boost function. After a certain time the power level will switch down automatically to a lower simmering setting (6 to 11). When using the automatic boost function only the simmering setting with which the food is to be cooked through needs to be selected since the elec- tronic unit switches down automatically.
Cleaning and care Cleaning and care Specific soiling Heavy soiling and stains (limescaling and shiny, mother-of- pearl-type stains) can best be removed when the hob is still • Switch the hob off and let it cool down before you clean it. slightly warm.
What to do if trouble occurs What to do if trouble occurs Does the hob or a cooking zone switch off suddenly and are lines or F7 shown? • Food which has boiled over or another object is currently on the touch-control sensor keys.
Instructions for assembly Instructions for assembly Safety instructions for kitchen unit fitters Ventilation • Veneers, adhesives and plastic surfaces of surrounding furni- • The back wall of the bottom cabinet must be open in the area ture must be temperature resistant (>75°C). If the veneers and of the cut-out in order to provide for air circulation.
Page 15
Instructions for assembly Clips Dimensions in mm • Drive the clips into the worktop cut-out at the intervals indicated. It is not necessary to adjust the height due to the horizontal stop motion device. Important: The horizontal drive of the clips must be flush with the worktop (avoid the risk of breaks).
Instructions for assembly Electrical connection No mains cable present in the factory • To connect the appliance, unscrew the cover of the connection • The electrical connection must be carried out by a quali- socket on the underside of the appliance in order to be able to fied electrician who is authorised to carry out such work! access the terminal.
Instructions for assembly Technical data Mains cable available in the factory • The hob has been fitted with a temperature-resistant connec- Hob dimensions (Fac.) tion cable in the factory. Height/ Width/ Depth ..mm 52 x 600 x 520 •...
Need help?
Do you have a question about the Glass ceramic induction and is the answer not in the manual?
Questions and answers