Download Print this page

TurboChef HIGH h 2020 Ventless Submittal Information page 14

Conveyor oven

Advertisement

NOTICE OF AUTHORIZATION TO APPLY THE UL MARK
2008-10-07
Mr. James K. Pool III
Turbochef Technologies Inc
Suite 105 4240 International Pky
Carrollton, TX 75007
United States
E-mail:
James.pool@turbochef.com
Reference:
File E151487
EPA 202 TEST METHOD: USING TURBOCHEF MODEL HHC2020 CONVEYOR OVEN WITH
Product:
POTBELLY'S SANDWICHES AS TEST MEDIA.
Dear Mr. Pool,
Per your request, project 08NK19482 was opened for the evaluation of grease-laden vapors produced from a variety
of Potbelly Sandwiches in a Turbochef Technologies Model HHC2020 conveyor oven. The scope of the project was
to determine the grease emissions from the Turbochef Technologies conveyor oven in accordance with EPA Method
202 test guidelines to demonstrate compliance with UL710B, the Standard for Recirculating Systems, Sec. 17 and
NFPA96, the Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations, paragraph
4.1.1.2. The test was conducted at our facility in Northbrook, IL on September 24
results of the EPA202 test.
For the record, the test was conducted using a Turbochef Model HHC2020 conveyor oven, cooking a variety of
Potbelly's sandwiches as specified by Turbochef Technologies in Appendix A. Please see the attached page
(Appendix A) for the test method and results of the test. The results are considered to comply with UL710B, Section
17 and NFPA96, paragraph 4.1.1.2 since the measured values of 1.91 mg/m
evaluation was conducted in regards to fire protection.
This letter will serve to report that all tests on the subject product have been completed with acceptable results. All
information generated will be retained for future use. This concludes all work associated with Project 08NK19482
and we are therefore closing this project. Our Accounting Department has been instructed to bill you for all charges
incurred.
Should you have any questions or comments concerning the above, please feel free to contact the undersigned.
Sincerely,
Bill Morler
Project Engineer
Department: 3015CNBK
Tel: 847-664-1852
Fax: 847-407-1852
E-mail: William.Morler@us.ul.com
Project 08NK19482
Reviewed by:
Fred Zaplatosch
Staff Engineer
Department: 3015CNBK
E-mail: fred.zaplatosch@us.ul.com
P.O. Number UL710B Conveyor
th
, 2008. This letter will report the
3
was less than the 5-mg/m
Page 5.1
3
limit. No

Advertisement

loading

This manual is also suitable for:

Hhc 2020