Lcd Contrast; Mode Timer (Mfc Models Only) - Brother MFC-J200 Advanced User's Manual

Chapter 1

LCD Contrast

If you are having difficulty reading the LCD,
try changing the contrast setting.
(MFC-J200)
a
Press Menu, 2, 5.
b
Press a or b to choose Light or Dark.
Press OK.
c
Press Stop/Exit.
(DCP-J100 and DCP-J105)
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
2.LCD Contrast.
Press OK.
d
Press a or b to choose Light or Dark.
Press OK.
e
Press Stop/Exit.
4
Mode Timer
1
(MFC models only)
The machine's control panel has three
temporary mode keys: FAX, SCAN and
1
COPY. You can change the amount of time
the machine takes after the last SCAN or
COPY operation before it returns to FAX
mode. If you choose Off, the machine stays
in the mode you used last.
1
a
Press Menu, 2, 1.
b
Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c
Press Stop/Exit.
1