Cleaning The Paper Feed Rollers - Brother MFC-J200 Advanced User's Manual

Cleaning the paper feed
rollers
If the paper feed rollers are stained with ink, it
may cause paper feed problems.
a
Unplug the machine from the electrical
socket. Pull the paper tray (1)
completely out of the machine.
NOTE
If the paper support flap is open, close it,
and then close the paper support.
b
Clean the Paper Feed Rollers (1) with a
soft lint-free cloth slightly moistened with
water, using a side-to-side motion.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
c
Put the paper tray firmly back in the
machine.
A
d
Re-connect the power cord.
NOTE
Do not use the machine again until the
rollers are completely dry. Using the
machine before the rollers are dry may
cause paper feed problems.
1
1
Routine maintenance
29
A