Brother MFC-J200 Advanced User's Manual page 36

d
Lift the scanner cover (1) to release the
lock. Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
2
CAUTION
Be careful not to pinch your fingers when
you close the scanner cover.
e
Open the ink cartridge cover.
f
Remove all four ink cartridges. Press
the ink release lever above each
cartridge to release it.
(See Basic User's Guide: Replacing the
ink cartridges.)
32
1
3 3
g
Install the orange protective part, and
then close the ink cartridge cover.
IMPORTANT
• Make sure the plastic tab on the left side
of the orange protective part (1) locks
securely into place (2).
1
• If you are not able to find the orange
protective part, ship the machine without
it. DO NOT install the ink cartridges as an
alternative before shipping.
2