Table of Contents
Advertisement
REMOTE VEHICLE STARTER
Menu 1- User Settings
Setting 5 Active/Passive Locks
1) No Auto-Lock with Passive Arm
*2) Doors Auto-Lock with Passive Arm
Press & Release the Program Button 5 Times (Setting 5) Confirmed with 5 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/ siren chirps, then release.
Press & Release the Program Button to proceed to the next step.
Setting 6 Sensor Enable/Disable
1) Sensor Disabled
*2) Sensor Enabled
Press & Release the Program Button 6 Times (Setting 6) Confirmed with 6 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/ siren chirps, then release.
Press & Release the Program Button to proceed to the next step.
Setting 7 Passive/Active Arming
1) Passive Arming
2) Active Arming with Rearm 2 Flashes/chirps
*3) Active Arming
Press & Release the Program Button 7 Times (Setting 7) Confirmed with 7 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/ siren chirps, then release.
Press & Release the Program Button to proceed to the next step.
Setting 8 Auxiliary Outputs
1) Type 1
2) Type 2
*3) No Auxiliary
Press & Release the Program Button 8 Times (Setting 8) Confirmed with 8 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/ siren chirps, then release.
Press & Release the Program Button to proceed to the next step.
.
.
..
continued from previous page
1 Flash/Chirp
2 Flashes/Chirps
1 Flash/chirp
3 Flashes/chirps
1 Flash/chirp
2 Flashes/chirps
3 Flashes/chirps
INSTALLATION MANUAL
1 Flash/Chirp
2 Flashes/Chirps Doors Lock when passive arming
Impact Sensor Disabled
Impact Sensor Enabled
Auto Arms 30 seconds after last door is closed
If unlock is pressed and no door is opened
Arms with remote transmitter only
Auxiliary outputs Activated
Auxiliary output without unlock/ disarm
Negative park light output
No auto-lock with passive arming
*(Default Settings)
Page 17
Advertisement
Table of Contents
