Specifications - AEG PROTECT A 1000 Operating Instrctions

5.1

Specifications

MODELL
Type
UPS-input
UPS-output
Battery
Indicator
Acoustic alarm
Protection
General data
Communication
Input voltage
Input voltage range
without battery mode
Frequency (auto
selection)
Rated output voltage
/AVR-technology
Rated output voltage
in battery mode
Frequency in battery
mode
Transfer time at mains
outage
Output Waveform
Type
Autonomy time
(full Load)
Recharge time (to
90% of rated capacity)
AC mode
Backup mode
Fault
Backup mode
Low battery
Overload
Battery replacement
Fault USP
Size
W x H x D (mm)
Weight (kg)
Operating temperature
range
Audible noise
(1 m distance)
Interfaces
Shutdown-Software
(on CD)
PROTECT A. 1000
1000 VA / 600 W
220 Vac / 230 Vac / 240 Vac
170 – 280 Vac
50 / 60 Hz ± 5 Hz
220 Vac / 230 Vac / 240 Vac
50 / 60 Hz ± 1 Hz
2 – 6 ms (typical)
Modified sinewave
12 V / 7 Ah x 2
Green LED lighting
LED bar graph (LED 2 to 5) indicates the load capacity
Green LED flashing
LED bar graph (LED 2 to 5) indicates the battery capacity
Red LED lighting
Sounding every 10 seconds
Sounding every second
Sounding every 0.5 second
Sounding every 2 seconds
Continuously sounding
Discharge, overcharge, and overload protection
140 x 180 x 370
14 kg
0° - 40° C
Relative humidity: 0 – 90 % (non-condensing)
< 45 dB (A)
USB and RS232 for status and measurement levels
Included for all typical operating systems
(e.g. Windows, Linux, Mac)
16
PROTECT A. 1400
1400 VA / 840 W
±10%
12 V / 9 Ah x 2
3 min
8 h
14,5 kg