Deleting Community Strings; Removing Trap Destinations; Password Protection - IMC Networks iMediaChassis/6 Operation Manual

Hide thumbs Also See for iMediaChassis/6:

Table of Contents

Press Enter. When finished, press Enter, then type reboot for changes to take effect.

The Saved Values and Current Values should now both display the changes made

(e.g., new IP address and subnet mask).

Deleting Community Strings

To delete all community strings and start over, press U. Press Y to proceed, N to

abort when asked, "Are you sure you want to delete all future strings?" Then, press

Enter.

This function will delete all community strings. Use iConfig to selectively delete

community strings.

Assigning Trap Destinations

The manageable device sends traps to a management computer when a certain event

takes place. To enter a trap destination, press T. Type the IP address of the

destination device when asked to "Enter a New IP Address." Then, press Enter. Type

the name of the community string (that the destination device has been configured to

accept) and press Enter. This function enables all traps. Use iConfig to selectively

activate and deactivate traps.

To remove all trap destinations, press K. Press Y to confirm. Press N to abort. Then,

press Enter.

Passwords protect the serial configuration process by pressing P from the main

configuration screen. Enter a password. (Passwords are case sensitive.) Enter the

password (without spaces) and press Enter. This will be requested whenever logging

on or off. To remove password protection, select P and instead of entering a

password press Enter.

Passwords are a way to make the management of network devices secure. It is the

responsibility of the network administrator to store and maintain the password lists. If

the password(s) are lost, neither the end user nor IMC Networks can retrieve it.

Please refer to the iConfig or HUBCTRL32 HELP files, depending on whether the

product is current or legacy.

Enabling/Disabling DHCP

To Enable/Disable DHCP, press D. Then, type reboot for the changes to take effect.

Table of Contents