Connecting An External Device; Connecting The Headphones; Putting Batteries In The Remote Control - Grundig Ovation 2i CDS 9000 WEB User Manual

14
CONNECTION AND PREPARATION

Connecting an external device

Note:
Switch the hi-fi system off before you connect external devices.
1 Use standard audio cables to connect the audio outputs of the
external device to the

Connecting the headphones

1 Insert the headphone plug (3.5 mm) into the »
left side of the hi-fi.
– The loudspeakers of the hi-fi system are switched off.
Note:
Excessive sound pressure from earphones and headphones can
cause hearing loss.

Putting batteries in the remote control

1 Open the battery compartment by turning the lid of the com-
partment to the right and lifting it off.
2 Observe the polarity marked on the base of the battery com-
partment when inserting the batteries (micro batteries, 2 x 1.5
R 6/UM 4/ AAA).
Notes:
If your hi-fi system no longer reacts properly to remote control
commands, the batteries may be flat. Always remove used bat-
teries. The manufacturer accepts no liability for damage caused
by leaking batteries.
Batteries shall not be exposed to excessive heat such as sunshine,
fire or the like.
Environmental note:
Batteries, including those which do not contain heavy metal,
should not be disposed of with household waste. Always dispose
of used batteries in accordance with local environmental
regulations.
»AUX IN« socket on the hi-fi.
U
« socket on the
----