Calling Information - Grundig Ovation 2i CDS 9000 WEB User Manual

Main Menu
USB
AUX
~ Setup
Time
Alarm
~ Network Config
 3/5
Configuration
Advanced Settings
~ Device Status
Config Wizard
Device Status
Device Name
~ OVATION 2i
SPECIAL SETTINGS

Calling information

You can call up information on your Ovation 2i and the network in
use. Settings cannot be made in this menu.
1 Press »i« to open the main menu.
2 Select menu item »Setup« with »S« or »A« and confirm
with » 9
3 Select menu item »Network Config« with »S« or »A«
and confirm with »
– Display: »Initialization
nection to the Internet is being built up.
4 Select menu item »Device Status« with »S« or »A«
and confirm with »
– The name of the hi-fi system, in this example »OVATION 2i«.
>
5 Select other information with »S«.
You can switch back the the previous information by pressing
»A«.
– You receive information on the name of the device, the
firmware, the hardware, etc.
– »Device Name«, »Firmware Version«, »Boot-
loader Version«, »Hardware Version«,
»Network name (SSID)«, »Network Type«,
»Security Encryption«, »WiFi Signal«, »WiFi
Channel«, »MAC Address«, »Auto Address
DHCP«, »IP Address«, »Subnet Mask«, »Gateway
IP«, »DNS Server 1«, »DNS Server 2«, »Proxy
Server«, »Proxy Hostname«, »Proxy Port«.
– Further explanations of this information can be found in the
glossary starting on page 54.
6 Close the status display with »i«.
«.
9
«.
9 «.
------------------------------------------------------------------
Please Wait«, the con-
47