In Windows 98/98 Se/Me - Creative WebCam Pro User Manual

In Windows 98/98
SE/Me
• You can safely install the
Creative WebCam Pro
with your computer
turned on.
• The USB port(s) on your
computer may be found
on the front panel
instead of the back
panel.
• You can daisy-chain the
Creative WebCam Pro
through another USB
device or attach the
Creative WebCam Pro to
a self-powered USB hub.
• If you have a
microphone, connect it
to your audio card. Most
audio cards have an
external microphone
connector. Read your
audio card's
documentation for more
information.
1. Do not connect Creative WebCam Pro to your computer before installing the
drivers.
If you accidentally begin installation with Creative WebCam Pro connected, the
Add New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the Creative WebCam Pro CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your
computer.
4. Follow the instructions on the screen to complete the installation.
You may be asked, after an application is installed, if you want to restart your
computer. Select No until all the drivers and applications are installed.
5. Connect Creative WebCam Pro's USB cable to an available USB port on your
computer (Figure 1-2). Place Creative WebCam Pro on top of your computer
monitor or another flat surface, or fix it to your laptop screen (Figure 1-3).
Windows automatically detects the device.
Figure 1-2: Connecting Creative WebCam Pro to your computer.
USB port
Installing Creative WebCam Pro 1-2