Creative WebCam Pro User Manual page 28

An application reports that the video driver is already in use, or that the
camera cannot be found.
Do one of the following:
• Ensure that the Creative WebCam Pro's USB connector is properly inserted, and
that the USB connector is enabled in the BIOS. Refer to your computer's
documentation for information on the BIOS.
• Reinstall the video capture drivers and restart your computer.
Insufficient system resources reserved for the USB port, causing the
system to be unable to function.
There are too many devices in the system, causing IRQ problems with the
system's USB controller.
Do the following:
1. Remove some devices from the system.
2. Restart the system.
The system will automatically rearrange the resources.
Troubleshooting B-2