In Windows 2000 - Creative WebCam Pro User Manual

In Windows 2000

1. Do not connect Creative WebCam Pro to your computer before installing the
drivers.
If you accidentally begin installation with Creative WebCam Pro connected, the
Found New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the Creative WebCam Pro CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your
computer.
4. Follow the instructions on the screen to complete the installation. You may be
asked, after an application is installed, if you want to restart your computer.
Do not restart your computer until all the drivers and applications are
installed.
5. Connect Creative WebCam Pro's USB cable to an available USB port on your
computer (Figure 1-2). Place Creative WebCam Pro on top of your computer
monitor or another flat surface, or fix it to your laptop screen (Figure 1-3).
Windows automatically detects the device.
6. When a Digital Signature Not
Found dialog box appears, telling
you that Creative WebCam Pro
(Figure 1-4) has been detected,
ignore the message and click the
Yes button.
Installation will be complete in a
while.
7. Check the image in the Video
preview pane of the Creative
WebCam Pro Camera
Configuration dialog box. If it
flickers or displays a series of dark
bands, click the Cancel Flicker
button.
Figure 1-4: Digital Signature Not Found
dialog box.
Installing Creative WebCam Pro 1-4