About Your Hardware - Creative Sound Blaster ZxR User Manual

About Your Hardware

For instructions on installing your Sound Blaster ZxR, consult the Quick Start leaflet.
To learn more about your product, consult the following sections:
Your Sound Blaster ZxR Audio cards
l
Audio Control Module
l
Notes
Actual products may differ slightly from those shown in this chapter.
Your Sound Blaster ZxR Audio cards
Your Sound Blaster ZxR audio cards have the jacks and connectors below to enable the attachment of a
wide variety of devices.
SB1510 Main Board
Jack or Connector
1. 6.3mm Microphone In
jack
2. 6.3mm Headphone jack
3. RCA Line Out 1 jack
(Front L)
4. RCA Line Out 2 jack
(Front R)
5. 3.5mm Line Out 1 jack
(Rear L/R)
6. 3.5mm Line Out 2 jack
(Center/Subwoofer)
7. DBpro daughter board
connector
1
2
3
4
5
6
Description
Connects to microphones with a 6.3mm (1/4-inch)
plug.
Connects to stereo headphones with a 6.3mm (1/4-
inch) plug.
Connects to the Front Left inputs on powered
analog speakers or an A/V receiver.
Connects to the Front Right inputs on powered
analog speakers or an A/V receiver.
Connects to the Rear Left and Rear Right inputs on
powered analog speakers or an A/V receiver.
Connects to the Centre and Subwoofer inputs on
powered analog speakers or an A/V receiver.
Connects to the DBpro daughter board.
7
About Your Hardware 3