No Sound From The Headphones; No Sound From The Speakers - Creative Live! Drive II User Manual

16 Live Drive CT4860/CT4861

No sound from the headphones.

Cause The headphones may not be connected or configured properly.
Solution Check the following:
The headphones are connected to the Headphones jack.
Under the Speaker view in the Main deck of Surround Mixer, make sure that the Speaker
selected is "Headphones".
In the Mixer deck of Surround Mixer, the recording source selected is "What U Hear".

No sound from the speakers.

Cause The speakers may not be connected properly, the mixer settings may not be
configured properly, or the headphones are connected to the Live! Drive.
Solution Check the following:
The speakers are connected to your card's output.
The correct source has been selected in the Mixer deck.
If the above conditions have been met and you still do not get any sound, click the red plus
sign above the VOL control and check whether the Digital Output Only check box is
selected. If it is, you are in the Digital Output Only mode and so must connect to digital
speakers to hear the sound from your audio card. See the section on Digital Output Only in
Surround Mixer's online help for more information.
If your headphones and/or the ¼" to 3.5mm adapter are connected to the Live! Drive,
disconnect them. Alternatively, open the Device Controls applet in AudioHQ, click the Live!
Drive tab, and then clear the Mute speakers when using headphones check box.