Table of Contents
Advertisement
Push the drain hose onto the spigot and secure with a
clip, ensure a loop is formed in the drain hose to pre-
vent waste from the sink entering the appliance.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
• Directly into a drain pipe at a height of not less than
60 cm and not more than 100 cm.
Connections overview
115
The end of the drain hose
must always be ventilated,
i.e. the inside diameter of
the drain pipe must be
larger than the outside di-
ameter of the drain hose.
The drain hose must not
be kinked.
115 cm
c
m
100
c
m
If your drain hose looks
like this (see beside) you
do not require the "U"
piece". Just push the hose
firmly in to the standpipe.
• Directly to a built-in drain pipe in the room wall.
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece
is available from your Local Centre.
140 cm
150
9 0
c
m
c
m
9
Hide quick links:
Advertisement
Table of Contents
