Zanussi ZWG6161P User Manual page 21

• remove the filter and clean it under the tap;
• turn the drum and align
the filter cover (FILTER)
with the arrow on the
door seal;
• open the filter cover by
pressing the special
hook and by rotating
the cover upwards;
Warning! Keep the
filter cover open un-
til the filter removal.
• before removing the fil-
ter, remove any fluff or
small objects from
around the filter;
• if necessary, place the
filter cover in the right
position again.
• open the filter cover
and insert the filter
again;
The filter is inserted correctly when the indicator on its
top is visible and blocked.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, it takes a long time
to fill with water, the starting button flashes red or the
display (if available) shows the relevant alarm (see chapter
"What to do if..." for more details), check if the water inlet
filters are blocked .
To clean the water inlet filters:
• close the filter cover;
• insert the mains plug
again.
• Turn off the water tap.
• Unscrew the hose from
the tap.
• Clean the filter in the
hose with a stiff brush.
21