Table of Contents
Advertisement
To activate this device, ro-
tate the button (without
pressing it) inside the
door clockwise until the
groove is horizontal. If
necessary use a coin.
Frost precaution
If the appliance is installed in a place where the tempera-
ture could drop below 0°C, proceed as follows to remove
any water remaining inside the appliance:
1.
unplug the appliance;
2.
turn off the water tap;
3.
unscrew the water inlet hose from the tap;
4.
unscrew the drain hose from the rear support and
unhook it from sink or spigot;
5.
place a bowl on the floor;
Environment concerns
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
4
To disable this device and
restore the possibility of
closing the door, rotate the
button anti-clockwise until
the groove is vertical.
6.
let the drain hose run along the floor, place the ex-
ternal extremities of the drain and inlet hoses in the
bowl placed on the floor and let water drain out com-
pletely;
7.
screw the water inlet hose to the tap and the drain
hose to the rear of the appliance again;
When you intend to start the appliance up again, make
sure that the room temperature is above 0°C.
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
Packaging materials
The materials marked with the symbol
>PE<=polyethylene
>PS<=polystyrene
are recyclable.
Hide quick links:
Advertisement
Table of Contents
