Advertisement
Quick Links
QoS with 4 Priority Queues
The QoS (Quality of Service) feature provides 8 intern
traffic. High priority packet streams will experience le
latency level for certain delay‐sensitive traffic. It can c
according to 802.1p priority tag and DSCP. The QoS o
scheduling at each egress port can be based upon a s
Port Mirroring
The port mirroring feature allows the ingress traffic to
track network errors or abnormal packet transmission
ingress traffic to be monitored by a single port that is
capture port can be any port. Mirroring multiple port
mirror capture port.
Q‐in‐Q VLAN for Improved Performance & Security
The VLAN feature in the switch offers the benefit of im
to isolate traffic between different users, thus providi
within the same VLAN broadcast domain also enhanc
tags, is an efficient method to enable subscriber aggr
Isolated Group for Port Protection
The isolated group feature allows certain ports to be
non‐isolated. Traffic between isolated group member
isolated group to the non‐isolated group.
802.1x Port‐Based Network Access Control for Impro
The 802.1x feature enables user authentication for ev
feature allows users to limit network access to non‐re
can establish an access mechanism based on user and
number of access stations.
24‐Port Fas
st Ethernet Management Switch
nal queues to support 2 different classifications of
ess delay inside the switch, which provides a lower
classify the packet as one of the 2 priorities
perates at full wire speed, and the actual
strict weighted round robin.
o execute port copying. This mechanism helps
n without interrupting the flow of data, allowing
defined as a mirror capture port. The mirror
s is possible, but can create congestion at the
mproved security and performance. VLAN is used
ing better security. Limiting the broadcast traffic
ces performance. Q‐in‐Q, the use of double VLAN
regation.
designated as protected ports. All other ports are
rs are blocked. Traffic can only be sent from the
oved Network Security
very network access attempt. The port security
egistered users. By enabling these features, users
d machine identities, as well as control the
with 2 Gigabit Combo Slots
ES-5226RM
Advertisement
Related Manuals for Edimax ES-5226RM
Summary of Contents for Edimax ES-5226RM
- Page 1 ES-5226RM 24‐Port Fas st Ethernet Management Switch with 2 Gigabit Combo Slots QoS with 4 Priority Queues The QoS (Quality of Service) feature provides 8 intern nal queues to support 2 different classifications of traffic. High priority packet streams will experience le ess delay inside the switch, which provides a lower latency level for certain delay‐sensitive traffic. It can c classify the packet as one of the 2 priorities according to 802.1p priority tag and DSCP. The QoS o perates at full wire speed, and the actual scheduling at each egress port can be based upon a s strict weighted round robin. Port Mirroring The port mirroring feature allows the ingress traffic to o execute port copying. This mechanism helps track network errors or abnormal packet transmission n without interrupting the flow of data, allowing ingress traffic to be monitored by a single port that is defined as a mirror capture port. The mirror capture port can be any port. Mirroring multiple port s is possible, but can create congestion at the mirror capture port. Q‐in‐Q VLAN for Improved Performance & Security The VLAN feature in the switch offers the benefit of im mproved security and performance. VLAN is used to isolate traffic between different users, thus providi ing better security. Limiting the broadcast traffic within the same VLAN broadcast domain also enhanc ces performance. Q‐in‐Q, the use of double VLAN tags, is an efficient method to enable subscriber aggr regation. Isolated Group for Port Protection The isolated group feature allows certain ports to be designated as protected ports. All other ports are ...
- Page 2 802.1d Compatible & 802.1w Rapid Spanning Tree For environments with multiple switches supporting S STP, users can configure the switches with a backup bridge path, so transmission and reception of f packets can be guaranteed in the event of a switch fail‐over. Broadcast/Multicast/Unknown‐Unicast Storm Contr To prevent broadcast, multicast, or unknown‐unicast flooding in the network, the storm control function can be used to restrict excess traffic. Thresho old values are available to control the limit rate for each port. Packets will be discarded if the count exce eds the designated upper threshold. T h i l S Technical Specifications ifi ti Complied Standards • IEEE 802.3 10Base‐T • IEEE 802.3u 100Base‐T • IEEE 802.3ab 1000Base‐T • IEEE 802.3z 1000Base‐X Ethernet • IEEE 802.3x flow control • IEEE 802.3 auto‐negotiation • IEEE 802.1q VLAN Subscriber Interface • 24 Fast Ethernet ports •...
- Page 3 Port Mirroring • Supports 1:N RX port mirroring • Supports port sniffer with TX‐RX pair monitor mod R t i t d G Restricted Group • To specify the direction of transmitted packets for specific ports Tag VLAN • 802.1q Multicasting g • IGMP snooping V1, V2 • Fast leave • Filtering via filtering profile • Per port channel limitation • MVR (Multicast VLAN Registration) STP/RSTP STP/RSTP • 802.1d • 802.1w Network Security • 802.1x port‐based network access control • Isolated group •...
- Page 4 Network Interface Interface Conne ector Port 10/100Mbps TP Jack (RJ‐45) TP (RJ ‐45) 1 to 24 1000Mbps SFP Fiber Module TP (RJ ‐45) / SFP 25 to 26 Dual‐Media Auto‐Detection Hardware Specifications Feature Description Voltage 100∼240V Frequency 50∼60Hz Consumption Consumption Ambient Temperature 0° to 50°C Humidity 5% to 90% Dimensions 240 (W) × 44 (H) × 200 (D) mm Principal: 1.44Kg Weight Package: 2.48Kg Safety Complies with FC CC Part 15 Class A & CE Mark approval Packing Information ...