Advertisement
Quick Links
Product Description
Product Description
ES‐5240GM, a 24‐port Gigabit L2 Plus management Switch
Gigabit and Fast Ethernet specifications. The switch includ
TP/SFP Fiber dual media. The switch can be managed thro
CLI or Web‐based management interface, associated with
administrator can logon the switch to monitor, configure a
g
overall network management is enhanced and the networ
bandwidth applications. In addition, the switch features co
(Quality of Service), Spanning Tree, VLAN, Port Trunking, B
Snooping capability via the intelligent software. The ES‐52
applications.
Key features
Key features
4 SFP slots for flexible fiber connection
9KB Jumbo Frame support
IEEE 802.1x Access Control to improve network sec
Port Mirroring to help IT manager monitor networ
Q‐in‐Q VLAN for performance & security
4,094 VLAN groups
,
g
IEEE 802.1D compatible, 802.1w Rapid Spanning T
Unknown Unicast/Broadcast/Multicast Storm Cont
Multicast VLAN Management for IPTV
IP‐Mac‐Port binding for LAN security
QCL based on application traffic for QoS and rate li
ACL based on Ethernet Type / ARP / IPv4 for packe
DHCP Option 82 relay agent
DHCP Option 82 relay agent
Gigabit 24‐p
p
port L2 Plus Management Switch
h, is a standard switch that meets all IEEE 802.3/u/x/z
des 20‐Port 10/100/1000Mbps TP and 4‐Port Gigabit
ough RS‐232 serial port, or through Ethernet port using
SNMP agent. With the SNMP agent, the network
g
and control each port's activity in a friendly way. The
rk efficiency is also improved to accommodate high
omprehensive and useful functions such as QoS
Bandwidth Control, Port Security, SNMP/RMON, IGMP
240GM is suitable for both metro‐LAN and office
curity
k traffic
Tree and 802.1s Multiple Spanning Tree
trol
imitation management
ets permit or deny, rate limitation and port copy
ES-5240GM
with 4 SFP slots
p
y
y
y
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Edimax ES-5240GM
Summary of Contents for Edimax ES-5240GM
- Page 1 ES-5240GM Gigabit 24‐p port L2 Plus Management Switch with 4 SFP slots Product Description Product Description ES‐5240GM, a 24‐port Gigabit L2 Plus management Switch h, is a standard switch that meets all IEEE 802.3/u/x/z Gigabit and Fast Ethernet specifications. The switch includ des 20‐Port 10/100/1000Mbps TP and 4‐Port Gigabit TP/SFP Fiber dual media. The switch can be managed thro ough RS‐232 serial port, or through Ethernet port using CLI or Web‐based management interface, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, configure a and control each port’s activity in a friendly way. The overall network management is enhanced and the networ rk efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features co omprehensive and useful functions such as QoS (Quality of Service), Spanning Tree, VLAN, Port Trunking, B Bandwidth Control, Port Security, SNMP/RMON, IGMP Snooping capability via the intelligent software. The ES‐52 240GM is suitable for both metro‐LAN and office applications. Key features Key features 4 SFP slots for flexible fiber connection 9KB Jumbo Frame support IEEE 802.1x Access Control to improve network sec curity Port Mirroring to help IT manager monitor networ k traffic Q‐in‐Q VLAN for performance & security 4,094 VLAN groups IEEE 802.1D compatible, 802.1w Rapid Spanning T Tree and 802.1s Multiple Spanning Tree Unknown Unicast/Broadcast/Multicast Storm Cont trol Multicast VLAN Management for IPTV...
- Page 2 Benefits QoS with four priority queues The QoS(Quality Of Service) Control List (QCL) feature pro The QoS(Quality Of Service) Control List (QCL) feature pro ovides four internal queues to support four different ovides four internal queues to support four different classifications of traffic. High priority packet streams exp erience less delay inside the switch, which supports lower latency for certain delay‐sensitive traffic. The ES‐52 240GM can classify the packet as one of the four priorities according to VIP port, 802.1p priority tag, DiffS erv and/or IP TOS, IPv4 and UDP/TCP application traffics. The QoS operate at full wire speed. The actual sc cheduling at each egress port can be based upon a strict priority, weighted round robin or a mix of both. Port Mirroring It is based on ACL function to classify the ingress traffic to o do port copy. This mechanism helps track network errors or abnormal packet transmission without interrup pting the flow of data. Allow ingress traffic to be monitored by a single port that is defined as mirror captu ure port. The mirror capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possi ible but can create congestion at the mirror capture ...
- Page 3 802.1d Compatible & 802.1w Rapid Spanning Tree & 80 02.1s Multiple Spanning Tree For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and rece ption of packets can be guaranteed in the event of any fail‐over switch on the network. 4 dual media ports for flexible fiber connection 4‐Port 21,22,23,24 dual media ports are provided for flex xible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or l long distance fiber backbone attachment. Use of the SFP module will disable their corresponding built‐in 10/100/1 1000Base‐T connections. Broadcast/Multicast/unknown‐Unicast Storm Control To limit too many broadcast/multicast/unknown‐unicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured d upper threshold. IP‐MAC‐Port Binding The IP network layer uses a four‐byte address. The Ether net link layer uses a six‐byte MAC address. Binding these two address types together allows the transmissio n of data between the layers. The primary purpose of IP‐MAC binding is to restrict the access to a switch to a n number of authorized users. Only the authorized client can access the switch’s port by checking the pair of IP‐MA AC Addresses and port number with the pre‐configured d t b database. If an unauthorized user tries to access an IP‐M th i d IP M AC bi di AC binding enabled port, the system will block the ...
- Page 4 Technical Specifications Complied Standards IEEE 802.3x Flow Control capability IEEE 802.1q VLAN IEEE 802.1p Performance Switching capacity: 24 Gigabit Ethernet ports with non blocking wire sp 24 Gigabit Ethernet ports with non‐blocking wire sp peed performance peed performance 8 K MAC addresses Supports Jumbo frame up to 9K Unknown Unicast/Broadcast/Multicast Storm Suppr ression Port Mirroring VLAN Port‐base VLAN IEEE802.1q tag‐base VLAN, up to 4,096 active VLAN Q‐in‐Q is an efficient method for enabling Subscribe er Aggregation Multicast VLAN management Supports QCL for Layer 4 TCP/UDP Port and ToS Clas ssification Supports 802.1p QoS with four level priority queue Supports priority in a Q‐in‐Q tag Bandwidth Control Supports bandwidth rating per port ingress and egre ess rate limit 500Kbps~1000Mbps with 1Kbps VSM (Virtual Stacking Management) ...
- Page 5 Protocol LACP Port trunking with 12 trunking groups up to 16 ports for each group t 16 GVRP/GARP 802.1q with GVRP/ GARP Multicasting g Supports IGMP snooping including active and passiv ve mode STP/RSTP/MSTP 802.1d/1w/1s Network Security 802.1x access control for port based and MAC based a uthentication Management Access Policy Control Access control List IP‐MAC‐Port binding g DHCP relay agent Snmpv1,v2c Network Management ■RFC 1213 MIB (MIB-II) ■RF FC 1757 RMON MIB ■Interface MIB ■S Statistics Group 1 ■Add ■Address Translation MIB ■H...
- Page 6 Network Interface Connector Port Interface 10/100/1000 Mbps TP Jack (RJ‐45) 10/100/1000 Mbps TP Jack (RJ 45) TP(RJ‐45) TP(RJ 45) 1 to 20 1 to 20 1000Mbps SFP Fiber Module TP(RJ‐45) / SFP 21,22,23,24 Dual Media Auto Detection Hardware Specifications Feature Description Voltage 100∼240 V Frequency 50∼60 Hz Consumption 40W Ambient 0° to 40°C Temperature Temperature Humidity 5% to 90% Dimensions 442(W) × 44(H) × 209 (D) mm Weight 2.82 Kg Safety...
Need help?
Do you have a question about the ES-5240GM and is the answer not in the manual?
Questions and answers