Advertisement
Quick Links
Description
The ES‐1008PH is an 8‐port Fast Ethernet switch with 4
network environments. The device's compact size make
Complies with IEEE 802.3at Power over Ethernet (PoE)
The ES‐1008PH features 4 IEEE 802.3at Power over Ethe
per port. It can convert standard 100‐240V AC power in
to supply power to IEEE 802.3at compliant network acc
verify whether the connected device is IEEE 802.3at com
through the LAN cable. The ES‐1008PH can connect wit
cameras and IP phones. It is the best solution for when
outlets are too far from the device.
No Special Networking Cable Required
The standard Cat‐5 Ethernet cable is used to link the ES
can transmit both data and power. No separate power
installation time and costs.
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum
network conditions and environmental factors. Product specifications and d
8-Port Fast Ethernet Switch
With 4 PoE+ Ports
PoE ports, designed for use in small or medium sized
es the ES‐1008PH ideal for users with limited space.
)
ernet (PoE) ports, which supply up to 30 watts of power
nto low‐voltage DC, which runs over existing LAN cables
cessories. The ES‐1008PH also features PoE detection, to
mpliant; if it is not a PoE device, only data will be sent
th a variety of PoE products, including access points, IP
power outlets are difficult to install or the power
S‐1008PH and the powered devices. This Ethernet cable
cable is needed for the powered devices, thus reducing
m performance, actual data rates, and coverage will vary depending on
design are subject to change without notice.
ES-1008PH
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Edimax ES-1008PH
Summary of Contents for Edimax ES-1008PH
- Page 1 ES-1008PH 8-Port Fast Ethernet Switch With 4 PoE+ Ports Description The ES‐1008PH is an 8‐port Fast Ethernet switch with 4 PoE ports, designed for use in small or medium sized network environments. The device's compact size make es the ES‐1008PH ideal for users with limited space. Complies with IEEE 802.3at Power over Ethernet (PoE) ) The ES‐1008PH features 4 IEEE 802.3at Power over Ethe ernet (PoE) ports, which supply up to 30 watts of power per port. It can convert standard 100‐240V AC power in nto low‐voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network acc cessories. The ES‐1008PH also features PoE detection, to verify whether the connected device is IEEE 802.3at com mpliant; if it is not a PoE device, only data will be sent through the LAN cable. The ES‐1008PH can connect wit th a variety of PoE products, including access points, IP cameras and IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat‐5 Ethernet cable is used to link the ES S‐1008PH and the powered devices. This Ethernet cable can transmit both data and power. No separate power cable is needed for the powered devices, thus reducing installation time and costs. Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum m performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and d design are subject to change without notice.
- Page 2 FEATURES & TECHNICAL SPECIFICATIONS • Complies with IEEE 802.3, 802.3u, 802.3x, 802.3af, and 802.3at stan dards • Supplies 48V DC with 30W output per port (80W total power budge • Automatically detects power devices (PD) and power consumption levels • Supports auto fault detection (over/under current & voltage) • Supports IEEE 802.3az Energy Efficient Ethernet Standards Features Filtering / Forwarding Rates IEEE 802.3 10BASE‐T RJ‐45 Ports: 8 100Mbps Port ‐ 148,800pps IEEE 802 3u 100BASE‐TX IEEE 802.3u 100BASE‐TX PoE Ports: 4 PoE Ports: 4 10Mbps Port ‐ 14 880pps 10Mbps Port ‐ 14,880pps IEEE 802.3af/802.3at PoE...
Need help?
Do you have a question about the ES-1008PH and is the answer not in the manual?
Questions and answers