Tuning Stations Manually; Radio Operation; Tuning Stations Automatically; Mute - Zenith DVT723 Installation And Operating Manual

Radio Operation (Continued)

Tuning Stations Manually

Press FM/AM on the remote control or on the
1 1
front panel until the frequency band appears on
the display and TV screen.
Use FM/AM on the remote control or on the
2 2
front panel to select the desired band.
Use TUNING (v V) on the remote control to tune
3 3 /
in the desired station.
For your reference
To turn the radio off
Press POWER to turn the unit off or select
another function mode (CD/DVD, VCR, LINE 1 or
LINE 2).

Tuning Stations Automatically

Hold down TUNING (v V) on the remote control for 1
/
or 2 seconds, and the next station is searched for auto-
matically.
ote
The search may not tune in or stop at a station with a
•
very weak signal.

Mute

Press MUTE to remove the sound.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display.
Press MUTE again to restore sound.
34

Labeling Stations

You can enter a name of up to 5 characters for preset
stations. The names (for example, "ABCD") appears in
the system's Display window when a station is selected.
Note that no more than one name can be entered for
each preset station.
Press 2 to move to the station name column.
1
- - - - - - - RADIO - - - - - - - 6/10
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
FM/AM
MEMORY/CLEAR
Use the 3 3 /4 4 buttons to select the character then
2
use the 1 1 /2 2 buttons to shift to the next or previ-
ous character.
Press MEMORY/ENTER to confirm the station
3
name.
Press MEMORY/ENTER on the remote control.
4
The station name is stored.
TUNING