Connections; Connecting To A Tv - Zenith DA3630 Installation And Operating Manual

Connections

Connecting to a TV

Make one of the following connections, depending on
the capabilities of your existing equipment.
Tips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use one of the connections described
below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD Receiver is connected directly to
the TV. Select the correct AV input on your TV.
– Do not connect your DVD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
Video connection
Connect the MONITOR OUT jack on the DVD
1 1
Receiver to the video in jack on the TV using the
video cable supplied (V).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD Receiver to the audio left/right in jacks on
the TV (A) using the supplied audio cables.
10
Rear of TV
S-VIDEO
VIDEO
INPUT INPUT
L
S A
V
S-Video connection
Connect the S-VIDEO OUT jack on the DVD
1 1
Receiver to the S-Video in jack on the TV using the
optional S-Video cable (S).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD Receiver to the audio left/right in jacks on
the TV (A) using the supplied audio cables.
Notes
The signal of S-VIDEO OUT jack will output only
when the function mode is selected to CD/DVD.
When you connect the DVD receiver to your TV, be
sure to turn off the power and unplug both units from
the wall outlet before making any connections.
AUDIO INPUT
L R