Weslo Pursuit 250 Fm Bike User Manual page 7

8. Turn the Adjustment Knob (9) counterclockwise and
remove it. Insert the Seat Post (5) into the Frame (1),
and align one of the adjustment holes in the Seat Post
with the indicated hole in the Frame. Insert the
Adjustment Knob into the Frame and the Seat Post,
and turn the Knob clockwise until it is tight. Make sure
that the Knob is inserted through one of the
adjustment holes in the Seat Post.
9. Identify the Left Pedal (24), which is marked with an
"L." Using an adjustable spanner, firmly tighten the
Left Pedal counterclockwise into the left arm of the
Crank (35). Tighten the Right Pedal (not shown) clock-
wise into the right arm of the Crank. Important:
Tighten both Pedals as firmly as possible. After
using the exercise cycle for one week, retighten
the Pedals. For best performance, the Pedals must
be kept tightened.
Adjust the Left Pedal Strap (25) to the desired posi-
tion, and press the end of the Left Pedal Strap onto
the tab on the Left Pedal (24). Adjust the Right Pedal
Strap (not shown) in the same way.
10. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
8
9
25
24
Tab
7
5
Adjustment
Holes
1
Hole
9
35