Weslo Pursuit 250 Fm Bike User Manual page 6

5. The Console (16) requires three 1.5V AA batteries;
alkaline batteries are recommended. Insert three bat-
teries into the Console. Make sure that the batteries
are oriented as shown by the markings inside of
the Console.
6. Have a second person hold the Console (16) near the
Upright (13). Connect the two console wires to the
Upper Wire (36) and the Pulse Sensor Wire (56).
Insert the console wires, the Upper Wire (36), and the
Pulse Sensor Wire (56) down into the Upright (13).
Attach the Console (16) to the Upright (13) with four
M4 x 12mm Screws (49). Be careful to avoid pinch-
ing the wires.
7. Attach the Seat (12) to the Seat Post (5) with three M8
Nylon Locknuts (10) and three M8 Flat Washers (51).
Note: The Nylon Locknuts and Flat Washers may be
preattached to the underside of the Seat.
5
Batteries
16
6
Console
Wires
49
7
51
10
6
16
56
36
13
Be careful to
avoid pinching
the wires.
12
5
51
10