Weslo Momentum 800 Elliptical User Manual page 10

3. Measure your heart rate if desired.
If there are thin
sheets of plastic on
the metal contacts on
the handgrip pulse
sensor, peel off the
plastic. To measure
your heart rate, hold
the handgrip pulse
sensor, with your
palms resting against
the metal contacts. Avoid moving your hands or
gripping the contacts too tightly.
When your pulse
is detected, a
heart-shaped
symbol will flash
in the left side of
the display each
time your heart
beats, one or two
dashes will
appear, and then your heart rate will be shown. For
the most accurate heart rate reading, hold the con-
tacts for at least 15 seconds. Note: If you continue
to hold the handgrip pulse sensor, the display will
Metal
Contacts
10
show your heart rate for up to 30 seconds. The dis-
play will then show your heart rate along with the
other modes.
If your heart rate is not shown, make sure that your
hands are positioned as described. Be careful not
to move your hands excessively or to squeeze the
metal contacts too tightly. For optimal performance,
clean the metal contacts using a soft cloth; never
use alcohol, abrasives, or chemicals.
WARNING:
is not a medical device. Various factors
may affect the accuracy of heart rate
readings. The pulse sensor is intended
only as an exercise aid in determining
heart rate trends in general.
4. To turn off the console, simply wait for a few min-
utes. The console has an "auto-off" feature. If
the pedals are not moved and the console but-
tons are not pressed for a few minutes, the
power will turn off automatically to save the
batteries.
The pulse sensor