Alarms - Lowrance HDS-5x Operation Manual

Alarms

This unit has alarms covering everything from depth and water temp rate to fuel and
waypoint radius. The alarms list has three tabs: Active, History and Settings.
• Active — used to view alarms that have been enabled
• History — shows log of alarm activity, which includes data like when
• Settings — provides access to Alarms list, allowing you to enable
NOTE: Some alarms will not work unless a corresponding
To enable/disable an Alarm:
1. Select Alarms from the Settings menu and press enTeR.
2. Highlight Settings and press enTeR.
3. Select the desired alarm from the alarms list and press enTeR.
Displays list of
enabled alarms
Enabled
Alarm
alarms were triggered and when they were cleared
alarms and set alarm limits
sensor is connected to the unit or the network.
Shows history of
alarm activity
Alarms List
Enable alarms and set
limits (thresholds)
Alarm Limits (Thresholds)
67
Settings