Control Knobs; Control Panel; Oven Vent - GE JD966 Owner's Manual

Care and cleaning of the range.
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is re-engaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
How to Remove Packaging Tape
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape and
cooktop labels on new appliances is an
application of a household liquid
dishwashing detergent, mineral oil or
cooking oil.

Control Knobs

The control knobs may be removed for easier
cleaning.
Before removing the knobs for cleaning,
please note that the knobs are in the
OFF position. When replacing the knobs,

Oven Vent

The oven vent is above the left side of the door.
This area could become hot during
oven use.

Control Panel

Deactivate the touch pads before cleaning.
See the Cooking/Self-Clean lockout
information in the Special features of
your oven control section in this manual.
Clean up splatters with a damp cloth.
You may also use a glass cleaner.
www.GEAppliances.com
Apply with a soft cloth and allow to soak.
Wipe dry and then apply an appliance
polish to thoroughly clean and protect
the surface.
NOTE: The adhesive must be removed from all
parts. It cannot be removed if it is baked on.
check the OFF position to insure proper
placement.
Wash the knobs in soap and water or a
vinegar and hot water solution but do
not soak.
It is normal for steam to come out of
the vent.
The vent is important for proper air circulation.
Never block this vent.
Remove heavier soil with warm soapy
water. Do not use abrasives of any kind.
Reactivate the touch pads after cleaning.
See the Cooking/Self-Clean lockout
information in the Special features
of your oven control section in this
manual.
27