Care And Cleaning; Control Knobs - GE EML27 Owner's Manual

Care and cleaning of the range.
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
WARNING
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective shipping
film with your fingers and slowly peel it from the
appliance surface. Do not use any sharp items to
remove the film. Remove all of the film before using
the appliance for the first time.

Control Knobs

The control knobs may be removed for easier
cleaning.
Make sure the knobs are in the OFF positions and
pull them straight off the stems for cleaning.
Control Panel
It's a good idea to wipe the control panel after each
use of the oven. Use a damp cloth to clean or rinse.
For cleaning, use mild soap and water or a 50/50
solution of vinegar and water. For rinsing, use clean
water. Polish dry with a soft cloth.
Painted Surfaces
Painted surfaces include the sides of the range and
the door, top of control panel and the drawer front.
Clean these with soap and water or a vinegar and
water solution.
Stainless Steel Surfaces
Do not use a steel wool pad; it will scratch the
surface.
To clean the stainless steel surface, use warm,
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
Porcelain Enamel Cooktop
The porcelain enamel finish is sturdy but
breakable if misused. This finish is acid-
resistant. However, any acidic foods spilled
(such as fruit juices, tomato or vinegar) should
not be permitted to remain on the finish.
If acids spill on the cooktop while it is hot, use
a dry paper towel or cloth to wipe it up right
If your range is removed for cleaning, servicing or any reason, be
sure the anti-tip device is reengaged properly when the range is
replaced. Failure to take this precaution could result in tipping of
the range and can result in death or serious burns to children or
adults.
To ensure no damage is done to the finish of the
product, the safest way to remove the adhesive from
packaging tape on new appliances is an application
of a household liquid dish washing detergent. Apply
with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts.
It cannot be removed if it is baked on.
The knobs can be cleaned in a dishwasher or they
may also be washed with soap and water. Make
sure the inside of the knobs are dry before replacing.
Replace the knobs, in the OFF position to ensure
proper placement.
Do not use abrasive cleansers, strong liquid cleaners,
plastic scouring pads or oven cleaners on the control
panel-they will damage the finish.
Do not use commercial oven cleaners, cleaning
powders, steel wool or harsh abrasives on any
painted surface.
(on some models)
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call our
toll-free number:
(on some models)
away. When the surface has cooled, wash with
soap and water. Rinse well.
For other spills such as fat spattering, wash
with soap and water or cleansing powders
after the surface has cooled. Rinse well. Polish
with a dry cloth.
21