Scan Preparation; Loading A Document - Brother DS-620 User Manual

4

Scan Preparation

Loading a document

IMPORTANT
• Insert only one page into the scanner at a time. Insert the next page only after the first one is completely
scanned. Inserting more than one page at a time may cause your scanner to malfunction.
• DO NOT pull on the document while it is feeding.
• DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted, or taped.
• DO NOT try to scan cardboard or fabric.
NOTE
• Make sure there is enough space behind the paper ejection slot. The scanned document will be ejected
from the rear of the scanner.
• Make sure documents that have ink or correction fluid on them are completely dry.
• Certain types of plastic cards may be scratched when scanned. To prevent damage to the card, we
recommended using the Carrier Sheet. For more information, see Loading the Carrier Sheet on page 10.
1
Set your document
of the feeder slot 3
To scan a plastic card
card with the left edge of the feeder slot
For DS-720D: When you perform duplex scanning, insert the first page face up into the feeder slot.
2
Slide the document guide
3
Gently insert the document until you feel its top edge touch the inside of the scanner.
3
1 face up in the feeder slot
.
1 , set the card top edge first into the feeder slot
3 .
4 until it touches the right side of the document.
4 2
1
2 and align the left edge of the page with the left edge
2
3
1
and align the left edge of the
4 2
4
4
9