Image Settings - Brother DS-620 User Manual

Scanning Applications and Settings

Image settings

Click Setup , and then click the Image tab to choose the image type and to set basic scan settings.
NOTE
This image is from the DS-720D.
(1)
(2)
(8)
(1) Image Selection Box
(2) Duplex
(3) Brightness
(4) Contrast
(5) Resolution
(6) Invert
(7) Profiles
(8) Defaults
Choose the type of document you want to scan.
(DS-720D only) Select the Duplex check box to perform Duplex (2 side) scanning.
Adjusts the lightness or darkness of an image. The range is from -100 to +100. The
factory default is 0.
Adjusts the range between the darkest and the lightest shades in the image. The
range is from -100 to +100. The factory default is 0.
Determine the quality of the scanned image. The factory default is 200 dpi.
Reverse the brightness and the colours in the image.
Save or change the scan setting in the Scanner Properties dialog box.
Reset values in this and all other Properties tabs to the original factory settings.
5
(3)
(4)
(5)
(6)
(7)
17