Using Radio Text; Displaying Radio Text; Storing And Recalling Radio Text - Pioneer FH-P4000R Operation Manual

RDS

Using radio text

This tuner can display radio text data transmit-
ted by RDS stations, such as station informa-
tion, the name of the currently broadcast song
and the name of the artist.
Notes
• When radio text is received,
displayed.
• The tuner automatically memorizes the three
latest radio text broadcasts received, replac-
ing text from the least recent reception with
new text when it is received.

Displaying radio text

You can display the currently received radio text
and the three most recent radio text.
1 Press to display radio text.
TEXT
Radio text for the currently broadcasting station
is displayed and is automatically scrolled in the
display.
• You can cancel radio text display by pressing
.
TEXT
• When no radio text is received,
displayed and the display of radio text is can-
celled after two seconds.
2 Press 2 or 3 to control scrolling.
Pressing 2 or 3 stops scrolling of the radio
text data. Each additional press scrolls the radio
text data one character at a time.
3 Press 5 or ∞ to recall the three most recent
radio text.
Pressing 5 or ∞ switches between the current
and the three radio text data displays.
• If there is no radio text data in memory the
display will not change.
is
TEXT
is
NO TEXT
Notes
• Display of radio text is cancelled after text
data has scrolled three times through the
display.
• If you do not perform an operation within
eight seconds, the radio text mode is can-
celled.

Storing and recalling radio text

You can store data from up to six radio text
transmissions at buttons
1 Display the radio text you want to store in
memory.
Refer to Displaying radio text on this page.
2 Press any of 1–6 and hold to store the
selected radio text.
The memory number will display and the
selected radio text has been stored in memory.
The next time you press the same
the radio text display the stored text is recalled
from memory.
.
1–6
button in
1–6
En
Section
05
19