Automatically Recording From A Tape - Pioneer PDR-F10 Operating Instructions Manual

Tip
If you want to record a copy-protected CD, you
can switch select analog recording over the
default digital. Between steps 3 and 4 above,
select the analog input:
• Press INPUT SEL. (top panel only)
to set the input.
Pressing
INPUT SEL
active input:
Automatically recording
from a tape
This feature, like automatically recording
from a CD, will start and stop the tape player
and the CD recorder together.
CD
4 ¢
7
SYSTEM
DISP
CHARACTER
1 Load a CD–R or CD–RW disc.
If it's a blank disc, the display indicates this.
If the disc isn't blank, use the
check that there's enough space on it for what
you want to record.
. repeatedly switches the
button to
DISP
4 Getting Started
2 Press TAPE to switch to the tape
player.
3 Load the tape you want to record.
Select the appropriate tape player options
(auto reverse, Dolby B NR). See the operating
instructions included with the tape player for
more on this.
Press 7 to make sure that the tape is stopped.
4 Press REC (top panel only).
The CD recorder goes into record-pause,
waiting for you to start the tape player, and
the indicator lights.
SYNC
5 Press TAPE to start the tape
playing.
Recording starts automatically with the tape.
Once the tape has finished playing, the CD
recorder goes back into record-pause.
• If you want to stop recording before the
end of the tape, press 7.
• If you run out of space on the CD before
the tape is finished, the CD recorder goes
back into record-pause.
If you're done, press 7.
6
After pressing 7, the recorder writes the track
information to the disc.
Take out the disc before switching the recorder
off.
• Manufactured under license from
Dolby Laboratories.
• "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
G001 En
19
En