Table of Contents
Advertisement
The advantage of the GRAPHIC
EQUALIZER
over conventional
tone controis
is that with the five controts
of the GRAPHIC
EQUALIZER
it is possible to control five different narrow. With
conventional tone controls a setting for a bass or treble boost or cut
will also affect the lower or upper mid frequencies.
The frequency
bands controlled by the five slide controls have been chosen to yield
the maximum
possible control action within the audio spectrum.
100 Hz:
The 100 Hz control 1s very useful for enhancing
low bass notes as in organ music.
330 Hz:
The 330
Hz contro!
will aflow you
to vary the
upper bass frequencies.
1 kHz:
The 1 kHz control is the presence control and can
be used
very
effectively
to emphasize,
or de-
emphasize vocalists
3.3 KHz:
The 3.3 KHz control will add brilliance and clarity
to brass instruments and violins
10 kHz:
The 10 kHz control can be used to make up for
missing high frequencies absorbed by the environ-
ment and to add a natural crispness to music
BASIC
OPERATIONS
100
330
1k
3.3k
10k
Emphasize
frequency
range
De-emphasize
frequency
range
[DECK AMPLIFIER |
REC
SYNCHRO REC START
switch
switch —]
STOP/EJECT
PLAY switch
switch
STOP/EJECT switch
PLAY switch ———_,
switch
POWER switch
FUNCTION switches
®
Set the cassette tape deck amplifier's POWER switch to on.
®
Adjust the volume with the VOLUME
control and tone
with the GRAPHIC EQUALIZER controls on the cassette
tape deck amplifier.
TAPE PLAYBACK
Playback can be performed on-either Deck | or Deck HH, but
if both decks are placed in the playback mode, Deck | will
automatically
be: given
priority.
If you
wish
to perform
playback on Deck II, be sure that Deck | is in the stop mode.
7
Push the FUNCTION
switch in the
TAPE position.
?
Load a pre-recorded cassette securely.
3 Select the DOLBY NR switch position.
4 Push the PLAY switch.
Push the STOP/EJECT switch to stop
the tape playback.
RECORDING
(function of Deck Il only)
1 Set the FUNCTION switch to the posi-
tion corresponding to the recording
program source (CD, VIDEO, TUNER,
or PHONO).
Load the cassette tape for recording
into Deck II.
Sa
Select the DOLBY
NR switch position.
Piay a program source.
Push REC and PLAY switches at a time.
¢ The RECORDING
indicator will light up.
Push the STOP/EJECT
switch to stop
the recording.
Oo Ge®d
ho
NOTE:
Graphic equalizer effects can be added to the speaker output,
but such effects cannot be recorded on the tape.
Auto-Stop Mechanism
When the tape is fully wound onto one ree! during recording
or playback, the auto-stop mechanism operates to release
the tape mechanism and bring the tape to a stop without
having to press the STOP/EJECT switch.
This mechanism prevents the tape from becoming stretched
and the pinch rollers from being deformed.
14
<ARB1078>
Advertisement
Table of Contents
