To Set The Minute Timer; To Set The Clock; To Cancel The Timer - GE JBP19 Use And Care & Installation Manual

The oven controls serve several purposes. Follow the directions for the
controls that apply to your model.
T Set the Clock
(on some models)
O
To set the clock, push the knob
in and turn the clock hands to
the correct time. The Minute
Timer pointer will move also. Let 9 10
the knob out, then turn the
Minute Timer pointer to OFF.
Automatic Clock
(on some models)
The clock must be set for the automatic ot'en timing
functions to work properly. The time of day cannot be
changed during a Timed Baking m Self-Cleaning cycle.
Timer
(on some models)
The timer is a minute timer only.
The timer does not control oven operations.
The maximum setting cm the timer is 11 hours
and 59 minutes.
To Reset the Timer
If the display is still showing the time remaining, you
may change it by pressing the HOU'R and MINT. pads
until the time you want appears in the display.
If the remaining time is not in the display, recall the
remaining time by pressing the TIMER ON/OFF pad
and then pressing the HOUR and MIN. pads until the
new time you want shows on the display.
Minute Timer
The Minute Timer has been combined with the range
\ '11 /
clock. Use it to time all your precise cooking operations.
04
You'll recognize the Minute Timer as the pointer which
is different in color and shape than the clock hands.
3
.
3
0

To Set the Minute Timer

/G\
To set the Minute Timer, turn the center knob, without
pushing it in.
At the end of the set time, a buzzer sounds to tell you
time is up. Turn knob, without pushing in, until
pointer reaches OFF and buzzer stops.
To
To Set the Timer

To Cancel the Timer

To cancel the timer, the remaining time must be in
the display. To recall the time remaining, press the
TINIER OhT/OFF pad once. To cancel the timer press
the TIMER ON/OFF pad again.
(on some models)
can set the time for up to 4 hours.
Set the Clock
1. Press the CLOCK pad.
2. Press the HOUR and MIN. pads
CLOCK
to set the time of day.
Press the TIMER ON/OFF pad.
Press the HOUR and MIN. pads until the
amount of time you want shows in the
display. The timer will start automatically
within a few seconds of releasing the pad.
(continued next page)
11