Surface Cooking Units - GE JBP19 Use And Care & Installation Manual

Surface Cooking Units

proper pan size-
Use
cookware having flat bottoms large
enough to cover the surface unit
heating element. The use of undersized cookware
will expose a portion of the surface unit to direct
contact and may result in ignition of clothing.
Proper relationship of cookware to surface unit
will also improve efficiency,
Never leave the surface units unattended at
high heat settings. Boilovers cause smoking
and greasy spillovers that may catch on fire.
Be sure the drip pans and the vent duct are not
covered and are in place. Their absence during
cooking could damage range parts and wiring,
Do not use aluminum foil to line the drip pans
or anywhere in the oven except as described in
this guide. Misuse could result in a shock, fire
hazard or damage to the range.
Only certain types of glass, glas<ceramic,
earthenware or other glazed containers are
suitable for cooktop service; others may break
because of the sudden change in temperature.
To minimize the possibility of burns, ignition of
flammable materials and spillage, the handle of a
container should be turned toward the center of the
range without extending over nearby surface units.
Always turn the surface units off before
removing cookware.
To avoid the possibility of a burn or electric
shock, always be certain that the controls for all
surface units are at the off position and all coils
are cool before attempting to lift or remove a unit.
units. Do not put them in a dishwasher. Do not
self-clean the surface units in the oven.
. Clean the cooktop with caution. If a wet sponge
is used to wipe spills on a hot cooktop, be careful
to avoid steam burns.
turn the fan off. The fan, if operating, may spread
the flame.
Keep an eye on foods being fried at high or
medium high heat settings.
Select
Frost on frozen foods or moisture on fresh foods
of the pan.
Use little fat for effective shallow or deep-fat
frying. Filling the pan too full of fat can cause
If a combination of oils or fats will be used
in frying, stir together before heating, or as fats
melt slowly.
Always heat fat slowly, and watch as it heats.
Use a deep fat thermometer whenever
possible t6 prevent overheating fat beyond
the smoking point.
SAVE THESE
INSTRUCTIONS
5