Part Identification Chart - NordicTrack Gx 5.0 Pro Bike Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M8 Locknut M6 Washer M10 Split M4 x 16mm M6 x 18mm
(86)––2 Screw (77)––7 Screw (75)––2
(88)––8 Washer (100)––4
M6 x 38mm Screw
M8 x 16mm M8 x 65mm Button
(25)––8
Screw (69)––8 Bolt (70)––2
M10 x 16mm M10 x 105mm Screw
Screw (67)––4
(65)––4
5