Additional Information; Troubleshooting - Pioneer AXM-P90RS Operation Manual

Additional Information

Troubleshooting

Common
Symptom
Power doesn't turn on.
The unit doesn't operate.
Operation with the remote con-
trol isn't possible.
The unit does not operate cor-
rectly even when the appropriate
remote control buttons are
pressed.
No sounds are heard.
The volume level will not rise.
There is no sound.
Volume level is low.
Cause
Leads and connectors are incor-
rectly connected.
The fuse is blown.
Noise and other factors are causing
the built-in microprocessor to oper-
ate incorrectly.
Battery power is low.
Cables are not connected correctly.
The volume level is low.
The attenuator is on.
Action (See)
Confirm once more that all connections are
correct.
Rectify the reason for the fuse blowing, then
replace the fuse. Be very sure to install a fuse
with the same rating.
Turn the unit off and then on.
Load new battery. (Page 4)
Connect the cables correctly.
Adjust the volume level.
Turn the attenuator off.
Appendix
39
En