Table of Contents
Advertisement
Installation
Installing the display unit
Important
! Do not install the display unit where:
— it may interfere with operation of the safety
devices of the vehicle such as airbags.
— it may interfere with operation of the vehi-
cle such as steering wheel and gearshift.
— it may obstruct the driver's view.
Otherwise, a fatal accident may result.
! Do not mount the display unit on a moving
part such as visor.
! Do not mount the display unit on the ceiling.
! Do not mount the display unit on an unstable
part.
There are four methods to install the display
unit.
! Installing with hook and loop fasteners
! Installing with double-sided tape
! Installing with mounting base
! Installing with flush mounting bracket
Installing with hook and loop
fasteners
Thoroughly wipe off the surface before affixing
the hook and loop fasteners.
1
Affix the hook and loop fastener
(rough surface) to the display unit.
1
1 Display unit
2 Hook and loop fastener (rough surface)
2
2
Affix the hook and loop fastener (soft
surface) to dashboard or console.
2
1 Dashboard or console
2 Hook and loop fastener (soft surface)
3
Attach the display unit.
2
1 Dashboard or console
2 Display unit
4
Route the display cable.
Secure the display cable so that it will not in-
terfere with operation of the vehicle.
Installing with double-sided tape
Thoroughly wipe off the surface before affixing
the double-sided tape.
Section
09
1
1
33
En
Advertisement
Table of Contents
