Table of Contents
Advertisement
Connections
Connecting the power cable
Translucent with yellow stripe
Connect to the constant
12 V supply terminal.
Translucent with black stripe
(chassis ground)
Connect to a clean, paint-free
metal location.
Red
Connect to terminal controlled
by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Yellow/black
If you use a device with a Mute function, connect
this lead to the Audio Mute lead on that device.
If not, keep the Audio Mute lead free of any connections.
! Cover the back-up terminal and ground
terminal of the hide-away unit with the sup-
plied covering.
This unit
Covering
Fuse (4 A)
Fuse resistor
Fuse resistor
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Section
08
27
En
Advertisement
Table of Contents
