Setting
System Information
1. Go to Main menu > Setting > System Setup > System Information.
2. Press OK key to view the software/hardware Information of this unit.
Factory Default
1. Go to Main menu > Setting >System Setup >
Factory Default.
2. Press OK key and input the correct the PIN code
and press OK key again to confirm your selection,
the factory default data will be loaded.
Note: Factory default PIN is "0000".
User Preferences
OSD Language
Go to Main menu > Setting > User
preferences >OSD language.
Only English is supported for this unit.
OSD Transparency
1. Go to Main menu > Setting > User Preferences >OSD Transparency.
2. Press ▲▼ key to select the OSD Transparency
option, and press OK key to enter submenu.
3. Press ▲▼ key to select the transparency
value (4 transparency modes
are available: 30%, 50%, 75%, 100%), and press
OK key to confirm.
4. Press EXIT key to exit all menu or press MENU
key to return to the previous menu.
27